TECNISOLVENT

 

COATING AND LAMINATING LINES

TECNI-SOLVENT 200

- Speed: up to 200 mpm

- Web width: from 1200 to 2000mm

 

TECNI-SOLVENT 400

- Speed: up to 400 mpm

- Web width: from 1200 to 2000mm

 

TECNI-MASK

(Coating line to produce Masking tapes)

- Speed: up to 200 mpm

- Web width: from 1200 to 2000mm

 

SUITABLE TO HANDLE:

- Natural rubber solvent based pressure sensitive adhesive

 - Acrylic solvent based pressure sensitive adhesive

 - Primer / Release solvent  based solutions if required for product application.

 - Water based adhesives

 

PRODUCTS:

 - BOPP tapes

 - PVC tapes

 - Mono-adhesive tapes (PET, OPP..)

 - Masking tapes

 - Electrical tapes

 - Double side tapes (no woven, film…)

 - Special products

MAIN STANDARD CHARACTERISTICS

  • Automatic unwinder  (different models for any need)
  • Primer/Release coating and drying unit

Rotogravure system with “closed chambre doctor blade” or Mayer bar

Primer/release feeding and recycle systems with tanks and pumps

Vertical or horizontal hot air drying ovens with thermal blower modules

  • Adhesive coating unit

Coating head: rotating knife type, with knife and applicator rolls, parallel or overlapped arranged, prearranged for automatic correction

Vacuum driven pull in exit

  • Adhesive drying tunnel

High efficiency horizontal ovens, shall opening type, film conveyance by means of idle or driven rolls

Thermal blower modules: integrated or separated

-      Each module can be dedicated to 1 or 2 sections of ovens

-      Air heating with thermal oil, steam or overheated water batteries, or gas burners

  • Equipment and devices for solvent prevention

Insulating cabinets

LEL monitoring systems (I.R. or Flame Temp. Analyser type)

  • Draw and cooling unit with water cooled cylinders
  • Anti-surface treatment

For coating units inside frames and after coating web contact rolls. Eventually for nozzles and rolls inside release/primer/adhesive drying ovens.

  • Automatic winder (different models for any need)
  • Equipment and devices for the good control of the web

(Spreader rolls, antistatic devices, tension control devices…)

FITTING AND OPTIONS

Coating line can be equipped with:

  • Reels loading-unloading systems
  • Film stretching calenders group
  • Corona treatment stations
  • Other type of applicable adhesive coating heads

Mayer bar, reverse roll, “comma” roll system…

  • Other types of drying ovens:

Both sides vertical opening type, air flotation type, driven conveyor belts type…

  • Heat exchangers for energy recovery
  • High temperature curing ovens
  • Humidification system
  • Secondary unwinder with lamination group
  • Delaminating group with liner rewinder
  • Web pre-conditioning groups: heated calenders or I.R. plates
  • Web cleaning treaters
  • Web surface inspection and monitoring system
  • Coat thickness/basis-weight measuring system:

Total basis weight type or differential synchronized measuring type, with eventually automatic adjustment of the coating die

  • Supervision system with industrial PC

 

Informazioni su TECNISOLVENT

Materiali

Tipo di materiali

Spessore materiali

Min. (um)

Max. (um)

Larghezza materiali

Min. (mm)

Max. (mm)

Svolgitura

Larghezza bobina madre

Min. (mm)

Max. (mm)

Diametro

Max. (mm)

Diametro interno/i anima

mm , mm , mm

" , " , "

Materiale Anima

Taglio

Larghezze di taglio

Min. (mm)

Max. (mm)

Avvolgimento

Larghezza avvolgimento

Min. (mm)

Max. (mm)

Diametro/i interno anima

mm , mm , mm

" , " , "

Materiale anima

Velocità massima

Note


Dati Personali

Nome*

Cognome*

Ragione Sociale

Indirizzo*

CAP*

Comune*

Provincia*

Nazione*

Telefono*

Fax

E-mail*

Ruolo nell’azienda*

Dichiaro il consenso al trattamento dei dati personali ai sensi del D.L. 196/2003 (Leggi)